Color Data Sheet

Sculpture Brick Cement Colors are synthetic mineral oxide additives that are durable and alkali and ultraviolet resistant. For coloring Sculpture Brick Mortar mix.

SAFETY:

READ and UNDERSTAND the Material Safety Data Sheet (MSDS) before using this product. WARNING: Wear protective clothing and equipment. See HMIS block. For emergency information, call CHEMTREC at 800-424-9300 or 703-527-3887 (outside USA). KEEP OUT OF REACH OF CHILDREN.

PREPARATION:

READ ALL DIRECTIONS BEFORE STARTING WORK. Prepare the substrate as required for the cement product being colored. To test color results, mix a small amount of color with the cement product to be used and apply to a concrete block. The color appears darker when freshly applied and lightens to its final color when dry. Thoroughly mix the cement color with dry powder cement products then add water. Color variations can occur due to the color of the cement, sand and coarse aggregate used, amount and mineral content of the water used, amount of troweling, amount of water used in finishing, and curing methods employed. These conditions are beyond the control of the manufacturer.

MIXING:

Thoroughly preblend the Sculpture Brick Cement Color with the Sculpture Brick dry powder cement product before adding mix water. Add 2/3 of suggested mix water and mix until all material is of a uniform color. Add the balance of the water and mix to a workable consistency. Care must be taken to keep proportions of materials the same from batch to batch. Color will tend to even out over time. Use 1 lb. (.45 kg) of Sculpture Brick Cement Color per 80 lb.(27.2 kg) bag of Sculpture Brick Mortar Mix. If a lighter color is desired use less cement color.

PLACEMENT: Place mixture according to the corresponding Sculpture Brick Mix product literature.

CURING:

Wetting the surface may result in spotting.

Packaging:

1 lb. (.45 kg) – Charcoal – UPC: 7-64661-21001-6

1 lb. (.45 kg) – Brown – UPC: 7-64661-21101-3

1 lb. (.45 kg) – Buff – UPC: 7-64661-21201-0

1 lb. (.45 kg) – Red – UPC: 7-64661-21301-7

1 lb. (.45 kg) – Terra Cotta – UPC: 7-64661-21401-4

* Using Sherwin-Williams H&C Stains, we can accomplish virtually any color desired

CAUTION! CAUSES IRRITATION -Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Exposure may result in irritation of the skin, eyes, or nasal passages. When wet, contact with the skin or eyes may result in irritation. FIRST AID: In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get prompt medical attention; for skin, wash thoroughly with plenty of soap and water. CAUTION! HARMFUL IF INHALED – Avoid breathing dust. Keep container closed.